DESCRIPTION
The Extron DTP R DP 4K 230 is a digital twisted pair receiver that works with Extron DTP®-enabled products to send DisplayPort, audio, and bidirectional RS-232 and IR signals up to 230 feet (70 meters) over a shielded CATx cable. It provides an effective means of incorporating higher resolution DisplayPort signals with embedded audio into DTP Systems, and supports Type 2 dual-mode DisplayPort for HDMI, 4K‑capable devices. The receiver accepts analog stereo audio signals from a DTP‑enabled product over the same shielded twisted pair cable. It supports video signals at resolutions up to 4K, including 2560x1600. The compact enclosure size and remote power capability make the DTP R DP 4K 230 ideal for discreet placement in lecterns, behind flat-panel displays, or wherever needed to meet application requirements.
The HDCP-compliant DTP R DP 4K 230 enables the reliable transmission of DisplayPort signals. In addition, DDC communication of EDID and HDCP is continuously maintained between a source and display, ensuring direct compatibility and optimal signal transmission between devices. The output supports Type 2 dual-mode DisplayPort, which allows source signals to be sent to a 4K‑capable HDMI or DVI device with an appropriate adapter. The DTP R DP 4K 230 also receives stereo analog audio from a DTP‑enabled matrix switcher, switcher, or signal processor. The analog stereo audio signal is sent over the same shielded twisted pair cable as the DisplayPort and control signals, eliminating the need for a separate cable run to support analog audio at the receiver.
The twisted pair receiver provides other convenient, integrator-friendly features designed to help simplify installation. The DTP R DP 4K 230 supports simultaneous transmission of bidirectional RS‑232 and IR signals from a control system for AV device control. Also, the receiver can be remotely powered over the shielded twisted pair cable by a DTP‑enabled product, allowing both devices to share one power supply.
The DTP R DP 4K 230 can be integrated with an Extron DTP CrossPoint® Presentation Matrix Switcher, or other DTP‑enabled products to support displays and other output devices at remote locations. The receiver is housed in a 1" (2.5 cm) high, quarter rack width metal enclosure. The low profile design of the DTP R DP 4K 230 allows for discreet placement in lecterns and behind flat-panel displays.
Extron recommends Extron-certified XTP DTP 24 shielded twisted pair cable, shielded RJ‑45 plugs, jacks, and couplers engineered for optimum signal transmission with Extron DTP Series products. The XTP DTP 24 cable is certified to 475 MHz, and utilizes a SF/UTP design with four unshielded 24 AWG twisted pair conductors inside an overall braid and foil shield for superior performance and noise immunity.
Features
* Receives DisplayPort plus control and analog audio up to 230 feet (70 meters) over a shielded CATx cable — The DTP R DP 4K 230 provides high reliability and maximum performance on an economical and easily installed cable infrastructure.
* Input: One DTP® 230 twisted pair input on RJ-45
* Outputs: One DisplayPort, stereo audio on captive screw
* Supports computer and video resolutions up to 4K
* Output supports Type 2 dual-mode DisplayPort for interoperability with 4K-capable devices — Provides connectivity between a dual-mode DisplayPort-equipped source and a 4K-capable HDMI or DVI device with an appropriate adapter.
* Supports DisplayPort SST - Single Stream Transport data rates up to 10.8 Gbps
* Remote power capability — For simplified installation, the receiver can be remotely powered by a DTP-enabled product over the twisted pair connection.
* Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance
* Compatible with CATx shielded twisted pair cable — Shielded twisted pair cabling with solid center conductor sizes of 24 AWG or better is recommended for optimal performance.
* Accepts additional analog stereo audio signals — The DTP R DP 4K 230 accepts stereo analog audio from a DTP-enabled product. Embedded digital audio is not de-embedded from the digital video signal.
* Bidirectional RS-232 and IR pass-through for AV device control — Bidirectional RS-232 control and IR signals can be transmitted alongside the video signal, allowing remote AV devices to be controlled without the need for additional cabling.
* Supports multiple embedded audio formats — The DTP R DP 4K 230 is compatible with a broad range of multi-channel audio signals, providing reliable operation with DisplayPort sources.
* HDCP compliant
* Supports EDID and HDCP transmission — DDC channels are actively buffered, allowing continuous communication between source and display.
* Compatible with all DTP 230 Series transmitters and DTP-enabled products — Enables mixing and matching with desktop and wallplate transmitters, as well as other DTP-enabled products to meet application requirements.
* LED indicator for signal presence and power — Provides visual indication of system status for real-time feedback and monitoring of key performance parameters.
* RJ-45 signal and link LED indicators for DTP port — Provides a means for validating signal flow and operation, allowing quick identification of connectivity issues.
* New JITC Certified — Successfully completed interoperability and information assurance testing for use in government applications and other mission-critical environments.
* 1" (2.5 cm) high, quarter rack width metal enclosure — With a low profile enclosure, the device can be installed discreetly wherever needed.
* Highly reliable, energy-efficient external universal power supply included with Tx models, replacement part #70-775-01 — Provides worldwide power compatibility, with high demonstrated reliability and low power consumption for reduced operating costs.
