DESCRIPTION
The Extron DTP2 T 212 is a two-input transmitter for sending HDMI, audio, and control up to 330 feet (100 meters) over a shielded CATx cable to an Extron DTP®‑enabled product. It provides two HDMI inputs, one DTP2 output, and one HDMI output. It supports video resolutions up to 4K/60 at 4:4:4 chroma sampling, and complies with HDCP 2.2. Audio embedding and RS‑232 remote control facilitate integration in professional environments. Integrator-friendly features include EDID Minder®, auto-switching between inputs, and bidirectional RS‑232 and IR pass-through for remote AV device control. The low-profile enclosure enables discreet placement in lecterns, beneath tables, or wherever needed to meet application requirements.
The DTP2 T 212 enables the reliable, long distance transmission of HDMI signals at data rates up to 18 Gbps supporting HDR, Deep Color up to 12‑bit, 3D, and embedded HD lossless audio formats. Outputs are configurable for simultaneous operation, or the HDMI output may be assigned to either HDMI input to support a local monitor. In addition, the DTP2 output can be configured to send video and embedded audio, plus bidirectional RS‑232 and IR signals to an HDBaseT-enabled display. DDC communication of EDID and HDCP is continuously maintained between source and display, ensuring direct compatibility and optimal signal transmission between devices.
Features that Streamline Integration
To enhance and simplify integration of devices and to help ensure optimal system performance, the DTP2 T 212 features Extron EDID Minder, which automatically manages EDID by maintaining continuous EDID communication with each source, ensuring that the sources power up properly and reliably output content for display.
The DTP2 T 212 automatically adjusts color bit depth based on the display EDID to prevent color compatibility conflicts between a source and the display. Front panel LED indicators provide immediate visual confirmation of HDCP authentication and signal presence for each input and the output. If HDCP-encrypted content is transmitted to a non-compliant display, a full-screen green signal provides immediate visual confirmation that protected content cannot be viewed on that display.
The DTP2 T 212 provides a connection for sending stereo analog audio to a DTP®‑enabled matrix switcher, switcher, or signal processor. Analog stereo audio signals can be selectively embedded onto the digital video output signal. The DTP2 T 212 can be set to pass the embedded digital audio, embed the analog audio, or to automatically embed the analog audio when no digital audio is detected. Analog audio signals are sent over the same shielded twisted pair cable as the video and control signals, eliminating the need for a separate cable run.
The DTP2 T 212 provides other convenient, integrator-friendly features designed to help simplify installation. It supports simultaneous transmission of bidirectional RS‑232 and IR signals from a control system for AV device control. The DTP2 T 212 can be remotely powered over the shielded twisted pair cable by a DTP2‑enabled product. In addition, it can be configured to provide power to the connected DTP2 receiver, allowing both devices to share one power supply.
Convenient control options include front panel control, RS‑232, and contact closure with tally output. Configuration of the DTP2 T 212 is made simple with Extron’s PCS - Product Configuration Software with a user-friendly GUI that is very easy to navigate. This software application allows for expedited setup and commissioning, real-time operation and monitoring, plus the ability to configure several units in the same session.
DTP Family of Products
The DTP2 T 212 can be integrated with an Extron DTP CrossPoint® presentation matrix switcher, or other DTP-enabled products to support sources at remote locations. The transmitter is housed in a 1" (2.5 cm) high, half rack width metal enclosure. The low-profile design allows for discreet placement in lecterns and beneath tables.
Extron recommends Extron-certified XTP DTP 24 shielded twisted pair cable, shielded RJ‑45 plugs, jacks, and couplers engineered for optimum signal transmission with Extron DTP Series products. The XTP DTP 24 cable is certified to 475 MHz, and utilizes a SF/UTP design with four unshielded 24 AWG twisted pair conductors inside an overall braid and foil shield for superior performance and noise immunity.
Features
* Transmits HDMI plus control and analog audio up to 330 feet (100 meters) over a shielded CATx cable — The DTP2 T 212 provides high reliability and maximum performance on an economical and easily installed cable infrastructure.
* Inputs: Two HDMI, one 3.5 mm stereo mini jack for audio
* DTP2 and HDMI outputs — Outputs are configurable for simultaneous operation, or the HDMI output may be assigned to either HDMI input to support a local monitor.
* Supports computer and video resolutions up to 4K/60 @ 4:4:4 — Support of 4K/60 at 4:4:4 chroma sampling requires connection to a matching DTP2 product.
* Auto-switching between inputs — Auto-switching allows for simple, unmanaged installation in locations such as in a lectern or under a conference table. When multiple inputs are active, the switching priority is configurable.
* Analog stereo audio embedding — Analog stereo audio signals can be selectively embedded onto the digital video output signal. The DTP2 T 212 can be set to pass the embedded digital audio, embed the analog audio, or to automatically embed the analog audio when no digital audio is detected.
* Supported HDMI 2.0b specification features include data rates up to 18 Gbps, HDR, Deep Color up to 12‑bit, 3D, and HD lossless audio formats
* Support for HDR – High Dynamic Range video — Enables greater contrast range and wider color gamut by providing the necessary video bandwidth, color depth, and metadata interchange capability for HDR video.
* HDCP 2.2 compliant — Ensures display of content-protected 4K video media and maintains interoperability with earlier versions of HDCP.
* Remote power capability — For simplified installation, the transmitter can be remotely powered by a DTP2-enabled product over the twisted pair connection. It can also be configured to provide power to the connected DTP2 receiver product.
* Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance
* Compatible with CATx shielded twisted pair cable — The DTP2 T 212 fully supports a maximum transmission distance of 330 feet (100 meters) for all compatible resolutions when used with CATx shielded twisted pair cable. Shielded twisted pair cabling with solid center conductor sizes of 24 AWG or better is recommended for optimal performance.
* DTP2 output is compatible with HDBaseT-enabled devices — The DTP output can be configured to send video and embedded audio, plus bidirectional RS‑232 and IR signals to an HDBaseT-enabled display.
* Accepts additional analog stereo audio signals — The DTP2 T 212 accepts stereo analog audio signals for simultaneous transmission over the same shielded twisted pair cable.
* Audio input assignment — The analog audio input can be assigned to any video input, or it can be set to follow the input switch.
* Bidirectional RS‑232 and IR pass-through for AV device control — Bidirectional RS‑232 control and IR signals can be transmitted alongside the video signal, allowing remote AV devices to be controlled without the need for additional cabling.
* Supports multiple embedded audio formats — The DTP2 T 212 is compatible with a broad range of multi-channel audio signals, providing reliable operation with HDMI sources.
* Compatible with all DTP receivers and DTP‑enabled products — Enables mixing and matching with desktop and wallplate receivers, as well as other DTP‑enabled products to meet application requirements.
* User-selectable HDCP authorization — Allows individual inputs to appear HDCP compliant or non‑HDCP compliant to the connected source, which is beneficial if the source automatically encrypts all content when connected to an HDCP-compliant device. Protected material is not passed in non‑HDCP mode.
* Comprehensive EDID management — Use PCS software to access EDID Minder for setting video input EDID, capturing EDID from connected displays, or uploading custom EDID files. Proper EDID management ensures that sources and displays are easily integrated into a system resulting in optimized system operation. Freely downloadable EDID Manager 2.0 software is available for advanced EDID editing and creating custom EDID files.
* EDID Minder® automatically manages EDID communication between connected devices — EDID Minder ensures that the source powers up properly and reliably outputs content for display.
* HDCP Visual Confirmation — When HDCP‑encrypted content is transmitted to a non‑HDCP compliant display, a full‑screen green signal is sent to the display for immediate visual confirmation that protected content cannot be viewed on that display.
* HDMI to DVI Interface Format Correction — Automatically enables or disables embedded audio and InfoFrames, and sets the correct color space for proper connection to HDMI and DVI displays.
* Automatic color bit depth management — Automatically adjusts color bit depth based on the display EDID, preventing color compatibility conflicts between source and displays.
* Output muting control — Provides the capability to mute the HDMI and/or analog audio output at any time.
* Front panel security lockout — This feature locks out all front panel functions; all functions however, are available through USB or RS‑232 control.
* RS‑232 control port — Enables the use of serial commands for integration into a control system. Extron products use the SIS™ - Simple Instruction Set command protocol, a set of basic ASCII commands that allow for quick and easy programming.
* Contact closure remote control with tally output — Allows for remote selection of an input channel, while a tally output provides +5 VDC to light an LED to indicate the currently selected input.
* Front panel USB configuration port — Enables easy configuration without having to access the rear panel.
* LED indicators for signal presence, power, and link status — Provide visual indication of system status for real-time feedback and monitoring of key performance parameters.
* RJ-45 signal and link LED indicators for DTP port — Provide a means for validating signal flow and operation, allowing quick identification of connectivity issues.
* Easy setup and commissioning with Extron's PCS - Product Configuration Software — Conveniently configure multiple products using a single software application.
* 1” (2.5 cm) high, half rack width metal enclosure — With a low-profile enclosure, the device can be installed discreetly wherever needed.
* Includes LockIt® HDMI cable lacing brackets
* External Extron Everlast™ power supply included, replacement part #70-769-01 — Provides worldwide power compatibility with high‑demonstrated reliability and low power consumption
* Extron Everlast Power Supply is covered by a 7‑year parts and labor warranty