Mono 70/100 V Amplifier - 200 Watts

OVERVIEW

Key Features
* 200 watts rms output power:
XPA 2001-70V - 1 x 200 watts @ 70 volts
XPA 2001-100V - 1 x 200 watts @ 100 volts
* ENERGY STAR® qualified amplifier
* Professional grade signal-to-noise and THD+N performance
* Extron Patented CDRS™ - Class D Ripple Suppression
* Convection cooled, fanless operation
* Ultra low inrush current - no need for power sequencing

DESCRIPTION

The Extron XTRA™ Series XPA 2001 is a half rack 1U, convection cooled power amplifier delivering 200 watts into a 70 volt or 100 volt line. This professional grade amplifier features a 100 dB signal-to-noise ratio with less than 0.1% THD+N. The XPA 2001 is an ENERGY STAR® qualified amplifier with an Extron exclusive, highly efficient, advanced Class D amplifier design. It also features patented CDRS™ - Class D Ripple Suppression technology that provides a smooth, clean audio waveform and an improvement in signal fidelity over conventional Class D amplifiers. The XPA 2001 is housed in a half rack width metal enclosure, conserving rack space and weighing only 2.5 lbs (1.1 kg). The Extron exclusive, high efficiency design generates very little heat and allows the amplifier to be convection cooled.Energy Efficient Amplifier with Auto Power-Down
The XPA 2001 ENERGY STAR qualified amplifier is an energy efficient product that conserves energy and reduces costs. With an auto power-down feature that automatically places the amplifier into standby after 25 minutes of inactivity, it consumes just 10 watts when idle and less than 1 watt in standby mode.
The XPA 2001 is housed in a compact 1U, half rack width enclosure. This amplifier is UL 2043 plenum rated when used with the optional Flexible Conduit Adapter Kit, allowing for a concealed installation above a drop ceiling to prevent theft while providing convenient placement of AV equipment.
The XPA 2001 delivers 200 watts rms for high impedance speaker systems in voice reinforcement and distributed audio applications. The XPA 2001 is available in 70 volt and 100 volt models.
The XPA 2001 accepts balanced and unbalanced input signals and includes recessed, detented level controls located on the rear panel to prevent tampering. These controls allow for adjusting audio system gain structure, or setting individual levels for each zone. For applications requiring volume adjustment and muting control from a location other than the amplifier, remote control capability is available using the optional Extron VCM 100 or VCM 200 analog volume and mute controller or VC 50 analog volume controller. Additionally, the XPA 2001 includes multiple protection circuits that momentarily activate when an abnormal condition, such as overheating, is detected. An advanced, automatic clip limiter protects speakers from clipping distortion.
Features
* Inputs: Balanced or unbalanced stereo or mono on a 3.5 mm, 5-pole captive screw connector
* Speaker Outputs: Screw-lock, 5 mm, 2-pole captive screw connector
* 200 watts rms output power:
XPA 2001-70V - 1 x 200 watts @ 70 volts
XPA 2001-100V - 1 x 200 watts @ 100 volts — The XPA 2001 provides ample power output for larger rooms.
* ENERGY STAR® qualified amplifier — The XPA 2001 is an ENERGY STAR qualified amplifier and energy efficient product that conserves energy and reduces costs.
* Professional grade signal-to-noise and THD+N performance — The XPA 2001 delivers professional grade performance with 100 dB signal-to-noise ratio and THD+N of less than 0.1%.
* Extron Patented CDRS™ - Class D Ripple Suppression — CDRS is an Extron Patented technology that provides a smooth, clean audio waveform and an improvement in signal fidelity over conventional Class D amplifier designs. CDRS eliminates the high frequency switching ripple characteristic of Class D amplifiers, a source of RF emissions which can interfere with sensitive AV equipment such as wireless microphones.
* Convection cooled, fanless operation — The XPA 2001 does not require internal fans or vents for cooling, ensuring quiet, reliable operation. It generates substantially less heat than conventional power amplifiers, making it ideal for rack-mount applications.
* Ultra low inrush current - no need for power sequencing — Allows multiple XTRA Series amplifiers to be powered on simultaneously without overloading power circuits. This eliminates the need for power sequencing.
* Power factor correction - removes harmonic content on AC line — The XPA 2001 features power factor correction technology that smoothes out the high peak currents of the amplifier’s current draw, thus minimizing the presence of high frequency harmonics on the AC power line, and therefore preventing audible artifacts from being transmitted to other audio equipment in the system.
* Rack-mountable 1U, half rack width enclosure — The XPA 2001 reduces rack space requirements for many installations.
* UL 2043 plenum rated when used with optional Flexible Conduit Adapter Kit — The XPA 2001 meets UL 2043 for smoke and heat release for installation within a plenum airspace above a drop ceiling when used with the optional Flexible Conduit Adapter Kit, part # 70-228-02. Above-the-ceiling placement conceals the amplifier to prevent theft, and is convenient for installing equipment when space inside the room is limited.
* Auto power-down with fast power-up — The XPA 2001 meets ENERGY STAR qualification requirements with an auto power-down feature that automatically places the amplifier into standby after 25 minutes of inactivity, dramatically reducing power consumption. It quickly returns to full power status in less than one second upon signal detection.
* Rear panel recessed, detented level control — Provides attenuation of input signals for adjusting audio system gain staging. It is located on the rear panel to prevent users from tampering with level adjustments.
* Automatic clip limiter — Detects actual onset of clipping by comparing input and output waveforms. Gain is automatically reduced without audible artifacts to protect speakers from clipping distortion.
* Multiple protection circuits — Activate during output shorts, thermal overload, or DC faults to prevent damage to the amplifier and speakers.
* Remote standby port — Enables the XPA 2001 to be remotely powered down when not in use, reducing operating cost.
* Remote volume and mute control port — In basic installations without control systems, this port allows the XPA 2001 to be remotely controlled using the optional Extron VCM 100 or VCM 200 analog volume and mute controller or VC 50 analog volume controller.
* Input summing — Actively sums incoming left and right channel signals for mono amplification.
* High pass filter — This switch selectable filter rolls off frequencies below 80 Hz to prevent saturation of speaker transformers.
* 5 mm screw-lock captive screw speaker connectors — Enable simple, secure connections with 22 to 12 AWG speaker cables.
* Front and rear-mounted signal and protection indication LEDs — Provide convenient indication of input signal presence and protection circuit activation from both sides of an equipment rack.
* Front panel over-temperature LED — Provides visual indication that the enclosure temperature has exceeded the optimal value, well in advance of the onset of thermal protection circuitry.
* Highly reliable, energy-efficient internal universal power supply — The 100-240 VAC, 50/60 Hz, international power supply provides worldwide power compatibility with high demonstrated reliability.

SPECIFICATIONS