Key Features* Receives HDMI plus control up to 330' (100 m) over a shielded CAT6A cable* Supports computer and video resolutions up to 4K/60 @ 4:4:4* Stereo audio de‑embedding* HDCP 2.3 compliant* Supported HDMI 2.0b specification features include data rates up to 18 Gbps, HDR, Deep Color up to 12‑bit, 3D, HD lossless audio formats, and CEC pass‑through* Remote power capability with DTP2 and DTP3 products
The Extron DTP3 R 201 is a third-generation long distance, digital twisted pair receiver that works with Extron DTP®‑enabled products to extend HDMI, audio, and bidirectional RS‑232 signals up to 330 feet (100 meters) over a shielded CAT6A cable. It supports video resolutions up to 4K/60 at 4:4:4 color sampling and complies with HDCP 2.3. For maximum image quality and minimal latency, all supported video resolutions are transported without compression. The receiver features stereo audio de-embedding for convenient installation in professional environments. The compact enclosure size and flexible remote power capability make the DTP3 R 201 ideal for discreet placement behind displays, within equipment racks, or wherever needed to meet application requirements.The DTP3 R 201 enables the reliable, long distance transmission of HDMI 2.0b signals, supporting data rates up to 18 Gbps, HDR, Deep Color up to 12‑bit, 3D, and embedded HD lossless audio formats. In addition, DDC communication of EDID and HDCP is continuously maintained between a source and display, ensuring direct compatibility and optimal signal transmission between devices.
Convenient Control and PowerOther convenient, integrator-friendly features designed into the DTP3 R 201 help simplify installation. When HDCP-encrypted content is transmitted to a non-HDCP compliant display, a full screen green signal is sent to the display for immediate visual confirmation that protected content cannot be viewed on that display. Also, the receiver supports transmission of bidirectional RS‑232 from a control system for AV device control.
For added convenience, a USB-C configuration port on the front panel offers ready access to information and easy updating of firmware. Configuration of the DTP3 R 201 is made simple with Extron’s PCS - Product Configuration Software and its user-friendly GUI that is very easy to navigate. This software application allows for expedited setup, commissioning, real-time operation and monitoring.
The DTP3 R 201 can be remotely powered over the same shielded twisted pair cable by a DTP3- or DTP2-enabled product. In addition, it can be configured to provide power to a connected DTP3 or DTP2 transmitter, allowing both devices to share one power supply.
To support displays and other output devices at remote locations, the receiver can be integrated with an Extron DTP CrossPoint® presentation matrix switcher, or other DTP-enabled products. It is housed in a 1" (2.5 cm) high, quarter rack width metal enclosure. The low-profile design allows for discreet placement in lecterns and behind flat-panel displays.
The DTP3 R 201 receiver is housed in a 1" (2.5 cm) high, quarter rack width metal enclosure. The low-profile design allows for discreet placement in tight spaces such as behind a display. To ensure optimal performance with DTP3 systems, Extron recommends XTP DTP 22 cables and accessories. These 22-gauge shielded twisted pair cables, shielded RJ‑45 plugs, jacks, and couplers have been engineered for optimum performance for DTP3 products running at 18 Gbps. Extron XTP DTP 22 cable bandwidth is verified to 500 MHz and utilizes a S/FTP design with four shielded 22 AWG twisted pair conductors inside an overall braided shield for superior performance and noise immunity. Extron XTP DTP 24 cable may be used for distances spanning less than 230 feet (70 meters).
Features* Receives HDMI plus control up to 330' (100 m) over a shielded CAT6A cable — The DTP3 R 201 provides high reliability and maximum performance on an economical and easily installed cable infrastructure.* Supports computer and video resolutions up to 4K/60 @ 4:4:4 — Support of 4K/60 at 4:4:4 color sampling requires connection to matching DTP3 products.* Stereo audio de‑embedding — The captive screw stereo output is selectable for de‑embedded or pass‑through analog audio.* HDCP 2.3 compliant — Ensures display of content-protected 4K video media and maintains interoperability with earlier versions of HDCP.* Supported HDMI 2.0b specification features include data rates up to 18 Gbps, HDR, Deep Color up to 12‑bit, 3D, HD lossless audio formats, and CEC pass‑through* Remote power capability with DTP2 and DTP3 products — For simplified installation, the receiver can be remotely powered by a DTP2- or DTP3‑enabled product over the twisted pair connection. It can also be configured to provide power to the connected DTP2 or DTP3 transmitter.* Extron XTP DTP 22 shielded twisted pair cable is strongly recommended for optimal performance* Compatible with CAT6A shielded twisted pair cable* Bidirectional RS‑232 pass-through for AV device control — Bidirectional RS‑232 control signals can be transmitted alongside the video signal, allowing remote AV devices to be controlled without the need for additional cabling.* Support for HDR – High Dynamic Range video — Enables greater contrast range and wider color gamut by providing the necessary video bandwidth, color depth, and metadata interchange capability for HDR video.* Supports multiple embedded audio formats — The DTP3 R 201 is compatible with a broad range of multi-channel audio signals, providing reliable operation with HDMI sources.* Supports EDID and HDCP transmission — DDC channels are actively buffered, allowing continuous communication between source and display.* HDCP Visual Confirmation provides a green signal when encrypted content is sent to a non‑compliant display — A full‑screen green signal is sent when HDCP‑encrypted content is transmitted to a non‑HDCP compliant display, providing immediate visual confirmation that protected content cannot be viewed on the display.* Compatible with all DTP transmitters and DTP‑enabled products — Enables mixing and matching with desktop and wallplate transmitters, as well as other DTP‑enabled products to meet application requirements. Support for remote power requires connection to a DTP2- or DTP3‑enabled product.* Front panel USB‑C® configuration port — Provides convenient access for information and firmware updates.* LED indicators for signal presence, power, and link status — Provide visual indication of system status for real-time feedback and monitoring of key performance parameters.* RJ-45 signal and link LED indicators for DTP port — Provide a means for validating signal flow and operation, allowing quick identification of connectivity issues.* 1" (2.5 cm) high, quarter rack width metal enclosure — With a low profile enclosure, the device can be installed discreetly wherever needed.* Includes LockIt® HDMI cable lacing brackets* Optional, external Extron Everlast™ power supply available, replacement part # 70‑1259‑01 — Provides worldwide power compatibility with high demonstrated reliability and low power consumption.* Extron Everlast Power Supply is covered by a 7‑year parts and labor warranty