OVERVIEW
Key Features
* Ultra-wideband performance - 350 MHz to 500 MHz (-3 dB), depending on model
* Triple Action Switching™ for RGB delay
* Audio input gain and attenuation
* QS-FPC™ - QuickSwitch Front Panel Controller
* RS-232 control port
* Optional IR 501 handheld remote control
DESCRIPTION
The MVX 88 VGA A is designed to route high resolution computer-video and stereo audio signals. Convenient 15-pin HD connectors are used for all computer-video input and output connections. Unbalanced stereo audio is input on 3.5 mm stereo mini jacks, while balanced or unbalanced stereo audio is output on captive screw connectors. Using pre-terminated cable assemblies, such as Extron's VGA with Audio Cables, eliminates crimping and makes installations faster and easier.
In addition, the MVX 88 VGA A comes standard with the QS-FPC™ - QuickSwitch Front Panel Controller, which allows for touch-of-a-button input and output selection directly from the front panel. It can also be controlled through RS-232 serial control utilizing Extron's SIS™ - Simple Instruction Set commands, the optional Extron IR 501 remote control, the optional Extron MKP 2000 or MKP 3000 X-Y remote control panels, or via a third party control system.
Features
* Inputs: VGA on female 15-pin HD connectors; audio on 3.5 mm stereo mini jacks
* Outputs: Video on female 15-pin HD connectors; audio on captive screw connectors
* Ultra-wideband performance - 350 MHz to 500 MHz (-3 dB), depending on model — MVX Series models in I/O sizes from 4x4 to 12x8 provide a minimum of 350 MHz (-3 dB) RGB video bandwidth, fully loaded. Larger sizes, from 12x12 to 16x16, provide a minimum of 500 MHz (-3 dB) at full performance capability, when one input drives all outputs.
* Triple Action Switching™ for RGB delay — RGB delay blanks the screen when the matrix switcher switches to a new source. The new sync signals precede the RGB signals, so there is no glitch during the transition.
* Switches both balanced and unbalanced stereo audio — Output on captive screw connectors.
* Audio input gain and attenuation — Allows users to set the level of gain or attenuation for each audio input channel, eliminating noticeable volume differences when switching between sources.
* Audio breakaway — Provides the capability to break an audio signal away from its corresponding video signal, allowing the audio and video signals from one source to be switched to different destinations.
* Switchable audio output levels — Output levels can be switched between +4 dBu professional and -10 dBv consumer levels, allowing a mix of professional and consumer-level audio equipment.
* View I/O mode — Easily view which inputs and outputs are actively connected.
* QS-FPC™ - QuickSwitch Front Panel Controller — Provides a discrete button for each input and output, allowing for simple, intuitive operation.
* Global presets — Frequently-used I/O configurations may be saved and recalled from the front panel or via serial control. This time-saving feature allows you to set up I/O configurations and store them in memory for future use.
* Front panel security lockout — Prevents unauthorized use when the matrix switcher is installed in an unsecured environment where easy access is not desirable. In lock-out mode, a special button combination is required to operate the front panel.
* RS-232 control port — Using RS-232 serial commands, the MVX Series can be controlled and configured via the Extron Windows®-based control program, or integrated into a control system. Extron products use the SIS - Simple Instruction Set command protocol, a set of basic ASCII code commands that allow for quick and easy programming. The serial port also makes it easy to install firmware updates.
* Control software — Provides a graphical, drag-and-drop interface for I/O configuration and other customization functions via RS-232 remote control. This software also offers an emulation mode for configuration of an offsite matrix switcher; the I/O configuration may be saved for future downloading to the matrix switcher.
* Optional control panels and keypads — Optional X/Y control panels, bus control panels, and keypads provide the flexibility to control an MVX Series matrix switcher from a remote location.
* Optional IR 501 handheld remote control
* 1U, rack-mountable metal enclosure
* Highly reliable, energy-efficient internal universal power supply — The 100-240 VAC, 50/60 Hz, international power supply provides worldwide power compatibility with high demonstrated reliability.
