OVERVIEW
Key Features
* Open back, infinite baffle design
* 8 ohm nominal impedance
* 3/4" (1.9 cm) ferrofluid-cooled dome tweeter
* 6.5" (16.5 cm) polypropylene woofer
* Frequency range: 50 Hz to 20 kHz
* 25 watts continuous pink noise, 50 watts continuous program
DESCRIPTION
The Extron SoundField® SF 26X is a two-way ceiling speaker featuring an open back and coaxial dual driver design for use in non-plenum airspace environments. The driver complement includes a 6.5" (16.5 cm) woofer coupled to a 3/4" (1.9 cm) ferrofluid-cooled dome tweeter. The SF 26X provides a frequency range of 50 Hz to 20 kHz for accurate voice and detailed music reproduction. This speaker offers a nominal impedance of 8 ohms, and is engineered with a wide, uniform 110° conical coverage and uncolored off-axis response. The SF 26X features a thin-edged bezel for a refined appearance on the ceiling, and a magnetically attached grille.Music reproduction is enhanced with the exceptional low-frequency response of the polypropylene woofer, which is specifically designed for infinite baffle environments, and extends the frequency range down to 50 Hz. The dome tweeter provides wide mid and high frequency dispersion for optimal area coverage.
This SoundField Series speaker is ideally suited for overhead distributed audio applications for music and voice in classrooms, conference rooms, and boardrooms.
The SF 26X is designed for 8 ohm direct connection to power amplifiers, and provides a simple means to wire speakers in parallel for 4 ohm amplifier operation. It features a power rating of 25 watts continuous pink noise and 50 watts continuous program capacity.
SF 26X speakers are sold in pairs and include a 5 year parts and labor warranty.
The SF 26X features a thin-edged bezel for a refined appearance on the ceiling. The grille attaches magnetically to the baffle and quickly snaps into place. The white grille and bezel can be painted to match the architectural elements of the environment. If installing the SF 26X into a ceiling tile, the optional Ceiling Mount Kit is recommended to prevent deforming or breaking the ceiling tile.
Features
* Open back, infinite baffle design
* 8 ohm nominal impedance
* 3/4" (1.9 cm) ferrofluid-cooled dome tweeter
* 6.5" (16.5 cm) polypropylene woofer
* Frequency range: 50 Hz to 20 kHz
* 25 watts continuous pink noise, 50 watts continuous program
* 110° conical dispersion
* Internal driver overload protection
* Thin bezel and magnetically attached grille
* Spring-loaded locking arms for quick ceiling installation
* Optional Ceiling Mount Kit available for use with ceiling tiles, part # 70-991-01 – includes C-rings & V-rails
* Four pole captive screw connector simplifies parallel speaker wiring
* Grille and bezel are available in white only and may be painted to match environment
* 5 year parts and labor warranty
